AIRBAG MODULE NO COMMUNICATION WITH SCANNER
If you experiencing problems such as :
- Diagnostics not seeing airbag ecu
- Cannot proxi align airbag ecu in vehicle
- Mileage Flashing in the speedo
- Airbag fault error in speedo
- Fuel Cut off not available warning
- IPC : Fault code 0172687 lost Comms
- PCM : 0042281 Invalid Data
- BCM : B10AA4A Check Config
- Fault Code U172687
- Fault Code B105386
- Airbag light permanently on
- We recommend sending your unit to ecutesting.com for repair as this requires a processor replacement
You have communication but various fault codes b0100-49 that will not clear
DESCRIPTION Airbag ECU Data Repair
If your car airbag system has the following symptoms :
If your car airbag system has the following symptoms :
- If your airbag light is on ?
- If your diagnostic tool is reading b0100or b0100-49 in the airbag computer ?
- PROBLEM
- Internal memory chip corrupted
- CAUSES
- Discharged battery and/or by jump starting attempts
- Whilst driving normally unnoticed voltage peaks into the on-board power supply can cause this error
- Even if you have not had a crash and the light is on, then this can be a internal module error
- SOLUTION
- we can reprogram the chip on site with our dedicated airbag repair unit .see video on youtube
£199 includes diagnosis and alignment
Postal service £150.00
DO IT YOURSELF
if you have read the file and want the modified crash data file that will be £30 we will send you a payment link we require the original bin file and number on the case
