C.A.R.S.
CAR ALARM & RADIO SERVICES
MOBILE AUTO ELECTRICAL SPECIALISTS
ESTABLISHED SINCE 1990
Intermittent Electrical Faults & Battery Drain Diagnostics
Experiencing an electrical fault that comes and goes, or a car battery that repeatedly goes flat? Find out why these problems can be difficult to diagnose and what to expect from our initial diagnostic session.
Important customer information — please read before booking.
At C.A.R.S. (Car Alarm & Radio Services), we specialise in vehicle electrical fault diagnosis. Some of the most challenging jobs involve faults that cannot always be reproduced on demand, or electrical systems that continue consuming power after the vehicle has been switched off.
These problems can require a methodical investigation involving diagnostic equipment, electrical measurements, circuit testing and, in some cases, extended monitoring.
This page explains why these investigations can take time, what we can reasonably undertake during your initial appointment, and what happens if further diagnostic work is needed.
Initial Diagnostic Session
2 HOURSMaximum initial diagnostic session.
This is an initial investigation period, not a guarantee that the fault will be identified or repaired within the allocated time.
1. Why Are Intermittent Electrical Faults Difficult to Diagnose?
An intermittent fault is a problem that occurs occasionally rather than being present all the time. A vehicle may work perfectly when we arrive, even though the customer has experienced the problem repeatedly.
Examples of intermittent electrical faults include:
- Warning lights that appear and disappear.
- Occasional non-starting or starting difficulties.
- Electrical equipment that works sometimes but not others.
- Communication faults between vehicle control modules.
- Random loss of functions or electrical systems.
- Faults that occur only when the vehicle is hot, cold, wet or moving.
- Wiring faults caused by vibration, movement, corrosion or poor connections.
The problem may not occur during the appointment
If a fault is not present during testing, it may not be possible to reproduce the conditions needed to identify its cause. The vehicle might start normally, all warning lights might remain off, and the affected electrical systems might work throughout our visit.
This does not mean the reported fault is not genuine. It means the conditions required to investigate it may not be present at that time.
Why fault codes do not always give us the answer
Diagnostic trouble codes can provide valuable information, but they do not automatically identify a defective component. A code may describe a communication interruption, a voltage problem or an unexpected signal without identifying the underlying cause.
Further testing may be required to establish whether the cause is wiring, a connection, a power supply, an earth, a control module or another part of the system.
2. Why Can Parasitic Battery Drains Take So Long to Find?
A parasitic drain occurs when a vehicle consumes excessive electrical current while switched off. This can leave the battery discharged after the vehicle has been parked.
Possible causes include:
- Control modules that fail to enter or remain in sleep mode.
- Electronic systems repeatedly waking the vehicle.
- Faulty relays, switches or electrical components.
- Wiring faults or unwanted electrical connections.
- Aftermarket accessories or incorrectly installed equipment.
- Communication activity that prevents the vehicle from shutting down normally.
Modern vehicles need time to shut down
Many modern vehicles contain numerous interconnected electronic control modules. After the ignition is switched off, some systems may remain active for a period while the vehicle completes its shutdown procedures.
Measuring current immediately after switch-off may therefore give a misleading picture of the vehicle's normal parked consumption.
Depending on the vehicle, an investigation may require the battery condition to be assessed, current consumption to be monitored, and the vehicle to be allowed to enter its normal sleep state before meaningful conclusions can be drawn.
Why disconnecting components is not always a quick solution
Identifying a parasitic drain is not always a matter of pulling fuses until the current reading changes. Some faults can be intermittent, some systems communicate with one another, and disturbing a circuit can change the condition being investigated.
A change in current consumption may identify a useful direction for further testing, but additional checks may still be needed to establish the root cause.
Equally, a battery that fails a condition test may have its own problem. Battery condition, charging performance and possible excessive current draw need to be considered separately where appropriate.
Some investigations need extended monitoring
In certain cases, a current draw may only appear after the vehicle has been parked for a period, or a module may wake intermittently. These faults may require longer observation, potentially including overnight monitoring.
As a fully mobile auto electrical specialist, C.A.R.S. must also consider the practical arrangements required for any extended testing or return visit.
3. What Is Included in the Initial Two-Hour Session?
The initial session is intended to investigate the reported problem, gather evidence and determine the most appropriate next steps.
Depending on the vehicle and the symptoms, this may include:
- Discussing the symptoms and circumstances in which the fault occurs.
- Carrying out an initial diagnostic scan where appropriate.
- Reviewing relevant fault codes and available live data.
- Performing initial electrical measurements and circuit checks.
- Assessing battery condition and charging performance where relevant.
- Beginning current-draw testing where appropriate.
- Investigating possible power supply, earth or wiring problems.
- Assessing the findings and identifying possible next steps.
The exact tests performed will depend on the vehicle, the reported symptoms, the equipment required and the findings obtained during the appointment.
The initial session provides time for investigation. It does not guarantee that an intermittent fault will occur during testing, that a parasitic drain will be reproduced, or that the root cause will be identified or repaired within two hours.
4. What Happens If We Cannot Find the Fault Within Two Hours?
If the fault cannot be conclusively identified within the initial session, we will explain what has been tested, what the results indicate and what remains uncertain.
Depending on the findings, further work may involve:
- Additional diagnostic time.
- Testing under the conditions in which the fault normally occurs.
- Extended current-draw monitoring.
- Allowing the vehicle to remain undisturbed for an appropriate sleep period.
- Further wiring, component or communication network testing.
- Additional technical information or specialist equipment.
- A further appointment or an agreed extended monitoring arrangement.
We will discuss the proposed next steps and any additional charges with you before undertaking further chargeable work. You can then decide whether you wish to proceed.
5. Our Diagnostic Approach
We aim to use evidence-based testing rather than replacing components simply because they might be responsible.
-
Understand the symptoms.
We establish what is happening, when it happens and what information is available. -
Carry out appropriate initial tests.
We use diagnostic equipment and electrical testing where appropriate to the particular vehicle and fault. -
Assess the evidence.
We distinguish confirmed findings from possible causes and avoid presenting assumptions as a definite diagnosis. -
Explain the next steps.
If more time is needed, we explain why, discuss the available options and agree any further chargeable work with you first.
6. How You Can Help Us Find the Fault
Information from the driver can be particularly valuable when a fault is intermittent or cannot be reproduced on demand.
Before your appointment, please consider the following:
- What exactly happens when the fault occurs?
- How frequently does it happen?
- Does it happen when hot, cold, wet, parked or being driven?
- For a flat battery, how long is the vehicle parked before it will not start?
- Has the battery been replaced or tested recently?
- Have there been any recent repairs, jump-starts or electrical work?
- Are any dash cameras, trackers, radios or other accessories fitted?
- Have any warning messages, dashboard lights or fault codes been recorded?
Photographs, videos and a simple record of when the fault occurs can be extremely helpful. Please also tell us about any previous diagnostic work or components that have already been replaced.
7. Important Information Before Booking
Initial diagnostic time: Intermittent electrical faults and parasitic battery drain investigations are subject to an initial session of up to two hours.
No guaranteed outcome: The time required to identify a fault depends on the nature of the problem and whether the necessary conditions can be reproduced during testing.
Further work: Additional diagnostic time, extended monitoring or further appointments may be required. Any additional chargeable work will be discussed and agreed with you before it proceeds.
Repairs are separate: Identifying the cause of a fault and carrying out the repair are not necessarily the same job. Any required repair, replacement component or additional work will be discussed separately as appropriate.
By proceeding with a booking for this type of diagnostic investigation, customers should understand these limitations and the possibility that further work may be necessary. The applicable charges and terms will be explained before chargeable work is undertaken.
Frequently Asked Questions
Can you guarantee you will find my fault in two hours?
No. Two hours is the maximum initial diagnostic session, not a guaranteed diagnosis or repair time. Some faults cannot be reproduced during a single visit.
My car works perfectly when the auto electrician arrives. What happens?
We can investigate the available evidence and carry out appropriate checks. However, if the fault is not present, additional information, monitoring or a further appointment may be necessary.
Can you find out why my battery keeps going flat?
We can investigate the battery and charging system where appropriate and begin testing for excessive current consumption. The time required to identify the underlying cause depends on the vehicle and the nature of the drain.
Will I have to pay for more diagnostic time?
If further investigation is necessary beyond the initial session, we will discuss the proposed work and additional charges with you before proceeding.
Should I leave my car with you overnight?
Some battery drain investigations benefit from extended monitoring. Whether this is necessary, practical and available will depend on the vehicle and the arrangements agreed for the particular job.
Need Help With an Electrical Fault?
If your vehicle has an intermittent electrical problem, repeatedly suffers from a flat battery, or has an unexplained electrical drain, contact C.A.R.S. to discuss your symptoms and arrange an initial diagnostic session.
Providing your vehicle make, model, year, registration and a description of the symptoms will help us understand the problem before the appointment.
Call 07970 252155 Email an Enquiry
C.A.R.S. — Car Alarm & Radio Services
Mobile Auto Electrical Specialists
Established since 1990